|
Hoover F5914-900 SteamVac with Clean Surge | 
| Brand: Hoover
List Price: $249.99
Buy New: $139.99
You Save: $110.00 (44%)
New (34) from $139.99
Rating:  687 reviews
Sales Rank: 36
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 29.1
Dimensions (in): 29.6 x 19.4 x 14.4
MPN: F5914900
Model: F5914-900
UPC: 073502025550
EAN: 0073502025550
ASIN: B00009R66F
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Powerful 12-amp motor; deep cleans with hot tap water and carpet solution | | • | Five spinning/scrubbing brushes clean carpets, upholstery, bare floors | | • | Clean Surge feature gives extra burst of cleaning solution for spots or stains | | • | Two water tanks separate clean from dirty water | | • | Brush rotation indicator; 8-foot hose; 1-year warranty |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Product Description
HOOVER STEAM VACUUMS SteamVac SpinScrub Hoover steam vacuums clean spots and stains on your floors with ease. Hoover vacuums use a powerful 12 amp motor to propel 5 spin scrub brushes that wash and wipe away spots and stains. Includes extra long 24L power cord for efficient use in large rooms. Tool kit includes spin scrub powered hand tool, on board hose and upholstery tool. Includes 16 oz. detergent. 1 year warranty.
Amazon.com
This powerful home steam vacuum saves you the expense and hassle of having to rent a steam cleaner and keeps rugs, upholstery, and bare floors (other than hardwoods) looking like new. The powerful 12-amp motor combined with five spinning brushes that operate at either high or low speed lift the usual dirt and grime out of carpets. By pulling on the trigger in the comfortable upright handle, this deep cleaner releases the included carpet/upholstery cleaner and hot tap water. For more stubborn stains or for high-traffic areas, this SteamVac also has a Clean Surge feature, which sends an extra blast of cleaning solution into the stain by simply pressing a button on the handle. When cleaning is complete, release the trigger and the SteamVac forces hot air into the cleaning path so you can do a few dry strokes over the stain. This deep cleaner has two separate water tanks to keep clean water apart from dirty water. The top tank holds the detergent and 1 gallon of hot water and automatically mixes the two so you don't need to get your hands wet. The lower tank holds the dirty solution picked up from the carpet and unlatches to easily pour out into a sink without spilling. For cleaning stairs or upholstery, this deep cleaner has a long 8-foot hose and a special stair/upholstery nozzle that scrubs out spots. Other features of this deep cleaner include a brush indicator, which informs you that the brushes are spinning; an on/off foot pedal; a handle release pedal; and a 27-inch wraparound cord. The Hoover SteamVac is covered by a full one-year warranty. --Cristina Vaamonde
Amazon.com
This powerful home steam vacuum saves you the expense and hassle of having to rent a steam cleaner and keeps rugs, upholstery, and bare floors (other than hardwoods) looking like new. The powerful 12-amp motor combined with five spinning brushes that operate at either high or low speed lift the usual dirt and grime out of carpets. By pulling on the trigger in the comfortable upright handle, this deep cleaner releases the included carpet/upholstery cleaner and hot tap water. For more stubborn stains or for high-traffic areas, this SteamVac also has a Clean Surge feature, which sends an extra blast of cleaning solution into the stain by simply pressing a button on the handle. When cleaning is complete, release the trigger and the SteamVac forces hot air into the cleaning path so you can do a few dry strokes over the stain. This deep cleaner has two separate water tanks to keep clean water apart from dirty water. The top tank holds the detergent and 1 gallon of hot water and automatically mixes the two so you don't need to get your hands wet. The lower tank holds the dirty solution picked up from the carpet and unlatches to easily pour out into a sink without spilling. For cleaning stairs or upholstery, this deep cleaner has a long 8-foot hose and a special stair/upholstery nozzle that scrubs out spots. Other attachments include a bare floor nozzle and a powered hand tool that is also ideal for upholstery or small carpet areas. All tools are mounted on the front of the vac in a handy case. Other features of this deep cleaner include a brush indicator, which informs you that the brushes are spinning; an on/off foot pedal; a handle release pedal; and a 27-inch wraparound cord. The Hoover SteamVac is covered by a full one-year warranty. --Cristina Vaamonde
|
| Customer Reviews: Read 682 more reviews...
 Very good machine December 1, 2005
Lissie (SW Washington)
808 out of 810 found this review helpful
If your new machine LEAKS, see note #2 below. I am just amazed at how many people write that their machine leaked from day one, and they returned it. It will leak if you skip a crucial one-time set-up step.
Paid $170 at Best Buy. This is my first carpet cleaner so I have nothing to compare it to except my own expectations. Even though the name is SteamVac, like all the others in this class of cleaners, there is no Steam to it. That's just false marketing, but all the manufacturers do it, so no particular knock on Hoover.
First, let me say I'm ashamed to admit that our carpet hadn't been cleaned in 4 years, and that we live in the country where lots of dirt gets tracked in from outside. So the carpet was pretty darn dirty. The Hoover F5914-900 did a very nice job the first time I used it - a drastically noticeable difference in the appearance of the carpet. The water in the dirty water receptacle was black. Did it return the carpet to new condition? No, impossible. Will it take another treatment or two to really get it clean? Yes, that is the price I pay for ignoring wet-cleaning the carpet for years. One of this cleaner's best features is the ability to dry the carpet quite thoroughly. Since the front of the machine is made of clear plastic, you can see when you're vacuuming up water. If you want to dry the carpet as much as possible, keep vacuuming until you no longer see water being pulled up. As time has passed, the SteamVac has done an excellent job of maintaining my carpets.
My only gripe is that the dirty water container fills up too quickly and should be a little bigger. Ideally, the dirty water receptacle "should" be full right as you run out of clean water. Then, you shut down, empty the dirty water, refill the clean water and back to work. But this process gets out-of-sync with the dirty water receptacle filling up before you run out of clean water. So this can be a little inconvenient, but not a show-stopper.
The machine is well constructed but it IS plastic, with lots of compartments and latches and hose holders, etc, so one must simply be careful or those things will no doubt break off.
A few other notes:
1. If you are not the type to read manuals, do read this one. Assembly and operation are easy if you sit down and read the manual through before starting. It's not like a vacuum cleaner where you just plug it in and go.
2. My machine leaked badly BUT it was my own fault. There is a one-time only setup procedure where you squeeze the trigger and push the Clean-Surge button to lock a rod into place. Push the Clean-Surge button firmly. There may be a loud SNAP which sounds like you broke something, but you didn't. Until you get that snap, the Clean-Surge (which releases extra water-cleaner solution) is on all the time, hence the leaking. I didn't push the button hard enough initially, so I had the leak problem.
EDIT December 2007
Apparently many people are assuming that without a loud snap, the Clean Surge will not work. All that matters is that your machine doesn't leak. If your SteamVac doesn't leak, it is assembled properly and the Clean Surge will work!!! The only reason I emphasized the "snap" was because so many people were having leak problems, which are easily solved. And it's possible that Hoover has changed the design after getting so many returns from people who didn't read the instructions in the manual. So don't get hung up on the snap. If your machine does leak after assembly, you know what to do.
3. ANY time it seems like there is no suction, the problem is that something is not seated properly. It is easy to snap the lid onto the dirty water container without lining it up properly, which causes a vacuum leak. If there is a vacuum leak, there is no suction at the bottom of the machine, where it is needed to suck up water from the carpet. So recheck the dirty water lid.
4. If you have velvet or velvetine furniture, do NOT use the powered tool, use the utility tool. The powered tool is too strong for delicate fabric.
5. Like others have suggested, find a cheap alternative to the Hoover brand carpet detergent. One gallon of water doesn't clean a lot of carpet, and at 5 oz of soap per gallon, you go thru it fast.
6. Always be sure to dry vacuum your carpet with a regular vacuum cleaner first before using this machine to wash it. Be sure to remove and clean the brushes when you're done using this machine. Otherwise hair, thread, and balled up carpet fibers will dry on them and between them. Then the brushes won't turn. These are not "use and put away" machines like vacuum cleaners, they're "use, clean, and put away".
7. Here's something I do which you *might* want to try. For a very dirty carpet, I fill a cheap plastic 2 gallon watering can (or smaller for a smaller carpet) with hot water and a tablespoon or 2 of Oxy Clean. I then sprinkle the carpet heavily, being careful not to soak it. This saves trips to the sink to load up on clean, soapy water. Then use the Hoover normally.
8. Others have suggested using boiling water. Not for me, thanks. Too dangerous to handle and unnecessary, unless you've spilled or tracked in grease.
After reading countless reviews here, I have concluded that the problems people have encountered are from failing to properly set up the machine initially, failing to seat the dirty water lid properly, or failing to clean the machine after use. I recommend this Hoover. It won't perform miracles, but I think if it is not abused it will last a long time and do an excellent job of maintaining a carpet.
Great cleaning August 17, 2003
387 out of 394 found this review helpful
The F5914 really cleans carpets well. On my worst carpet area, the cleaner did as well as a commercial carpet cleaner. I recommend the following to make it a successful cleaning:
1) I supplement the hot water with some boiling water to really get the temperature up. By the time the water hits the spray nozzle, it has really cooled off so make it hotter. Bissell uses a heater, but it can't be that powerful without reducing motor power. Best to supplement.
2) Patience. Go slow and go over really bad areas. You will HAVE to pretreat and hand wash heavy stains, but so do the pros. Don't expect a diamond out of coal. You still have to do the work.
3) Clean often. I have one carpet that I waited way too long and it just won't come clean. The pros can't and I can't. BIG lesson learned there.Have fun with this. I can't believe how much dirt there was in my "clean" areas, so it will be great to have this around to clean when I desire to. I saved more than the price of the cleaner this weekend.
Cleans like a pro September 8, 2003
240 out of 245 found this review helpful
I'm very pleased with the Hoover F5914-900 Steam Vac. This is my first home steam cleaner. I delayed purchasing one because I never thought a home cleaner could do as good of a job as the pros. But this Hoover made me a believer. I used it to clean up pet stains and the smell and stains are long gone. The suction and scrubbing are an A+.
 Hoover "LukeWarmToCoolVac" - Will Never Buy Hoover Again December 9, 2005
K. Johnson (Great Lakes Region)
100 out of 112 found this review helpful
"SteamVac" is a misleading name that was obviously dreamed up by the Hoover marketing department. Unfortunately, I didn't do enough homework on this one and got sucked into (don't mind the pun) buying one. "LukeWarmWaterVac" would be giving this unit more credit than it is due. The only steam you get is when you pour water hot enough to steam into the tank. Even when used immediately, the water applied to the carpet is lukewarm at best. Within two minutes of operation, the applied water is completely cool. As for the brushes - they are powered by suction - not a belt - and are apparently there for show because they certainly are worthless. They worked marginally through the warranty period, then begin to jam, slow down, and finally refuse to rotate at all. This is a design that was obviously never tested adequately, and should have never been mass produced - shame on you, Hoover. This is the kind of engineering that goes into cheap, late-night, infomercial products - not an old, established brand name product. The hand attachment has a similar vacuum-powered brush set. When used (as on stairs) you must take care to barely touch the carpet or the brushes will stop, because they have predictably little power. It would be more effective to pour hot water/cleaning solution on the carpet and then vacuum it up with a Craftsman Wet-Vac than to use this attachment. The dirty water holding tank is poorly designed and molded so that it is nearly impossible to get it completely clean. Thoroughly cleaning the nozzle and brush area of this unit is a difficult ordeal that most won't even attempt. Very little thought appears to have been given to ease of cleaning. The clean water tank holds more water than the dirty water tank, so that you can never stop just once to dump and fill. You stop to dump, and then a little later, you stop to fill. If anything, the dirty water tank should always hold more than the clean. I originally thought that this $200+ unit would eliminate my need to have to go to the hardware store for a rental, but I was completely wrong. More convenient? Of course. Better cleaning? You must be kidding me. Please do your homework, and don't waste your money on one of these.
 Hoover and Bissell side by side comparison April 16, 2006
pebbles
100 out of 102 found this review helpful
I have been generally happy with my last two Hoover carpet cleaners and they have been durable for me. I used both TONS -- the 1st one was a very early model that was still going strong after 5 or 6 years of hard use, and I replaced it with one that had rotating brushes. It also got years of use but I accidentally damaged it thru my negligence. (Used it in an unheated cabin, left it overnight, and it got well below freezing - I broke the spray trigger when I impatiently tried to use it.) My last one still worked if you pushed the surge button and then pried it up again, but I decided to get a new one.
I purchased this model, but it leaked before even starting to use it, so I returned it and bought a Bissell Proheat 2x. I liked that it seemed easier to clean the machine than the Hoovers, and that it had a rinse option, although not conveniently located. I noticed immediately with first use that it wasn't as good as even my old (trigger broken) Hoover. The Bissell didn't extract water well at all, even though I went over and over an area trying to get the water up. It was obvious by looking that it also didn't clean as well (probably as a result of leaving dirty water still in the carpets.) If it'd been my first carpet cleaner I might have thought it great since it did get dirt out, but I knew they didn't look as clean as in the past and mostly they were WET. The next day, before returning it I bought ANOTHER Hoover 914-900 thinking the first leaky one was an anomaly. The 2nd one leaked initially also, but once I used it for a minute, pressed and released the trigger a few times and the seals got wet, it stopped leaking. Thus I had two new cleaners to try side-by-side. Where I used the Bissell after the Hoover, there was no difference, the Bissell didn't get the carpet any cleaner. Where I used the Hoover on where I'd cleaned with the Bissell the night before -- a BIG difference. The carpet was visibly cleaner; (it's a very light carpet so it's easy to see that) the dirty water collected confirms that it picked up dirt the Bissell left behind; and the carpet was drier. This was a return to what I expected based on my last 2 Hoovers -- damp carpet, not WET carpet, and I think it's why the Hoover cleaned better. The Hoover isn't perfect -- the tanks need to be bigger for fewer trips to the sink (if too heavy for some people, they wouldn't have to fill as full), and there is no good way to clean it! I did like the idea behind the Bissell of having clean water with which to either mix with the detergent and spray, or to rinse with, and it would be a plus if Hoover would find a way to do that. (Especially if the "rinse" button was on the handle and easily accessible.) But Bissell's technique of inserting a plastic bladder for clean water inside the dirty water tank means neither holds much water which makes for extremely frequent trips to the sink. Also, having to stop, bend over, and switch a dial on the base to "rinse" and the same to switch back to cleaning mode was highly inconvenient. Last, Bissell's on-board water heater didn't seem to make a difference. Leaving behind too much dirty water was its downfall, it didn't matter that the water went in "heated." I used the hottest tap water I could in the Hoover and it worked just fine. The "proheat" seems to me to be just another unneeded gizmo that can break. Overall, I guess it depends on what's most important to you. For me, clean carpets that dry in a couple of hours trumped ease of cleaning the machine.
|
|
|
We'll be adding even more exciting features to assist you in the coming year.
Thank you for shopping at the Depot.com online shopping depot.
©2008 Depot.com | |
