Lorex SG6130 2.4 GHz Wireless Camera & Receiver System (Black & White)

The SG6130's camera utilizes a black-and-white CMOS (complimentary metal-oxide semiconductor) image sensor with a 3.7-millimeter fixed wide-angle lens. This unit delivers a resolution of 240 horizontal TVL (TV lines), and has a minimum illumination of 0.1 Lux that is augmented by six IR (infrared) emitting LEDs (light emitting diodes). The Lorex SG6130 camera runs on 12-volt DC power via an included AC/DC adapter or via eight 1.5-volt alkaline batteries, and has an operating temperature of -10 to 50 degrees Celsius.

The SG6130's receiver allows for signal reception from up to 300-feet away with a clear line of sight. The Lorex SG6130 receiver includes a standard RCA composite video output connection that easily connects to most TVs or VCRs, and runs on 9-volt DC power via an included AC/DC adapter. This receiver can accept signals from up to four cameras simultaneously, allowing you to autoscan all four or display full-screen images of a single camera, and has an operating temperature of -10 to 50 degrees Celsius.

Technical Features:

• Signal distance: up to 300-feet (with clear line of site)
• Light sensitivity: minimum illumination of 0.1 Lux
• Horizontal resolution: 240 TVL
• Camera and receiver operating temperatures: -10 to 50 degrees Celsius
• Camera dimensions: approximately 6 x 7 x 8 centimeters (W x D x H)
• Receiver dimensions: approximately 16 x 9 x 4 centimeters (W x D x H)

About Surveillance Camera Technical Features
Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.

What's in the Box
Wireless camera, wireless receiver, AC Adapter (camera), AC adapter (receiver), RCA A/V cable, RF cable, owner's instructions, camera mount, battery box (camera), screws, and anchors