Customer Reviews:
Showing reviews 6-8 of 8
 Works fine.... December 28, 2007
M. Orr
2 out of 2 found this review helpful
I bought this saw and it works just fine. I don't use the laser, because I work outside in the sun and can't especially see it. Also, the laser only works if you keep your cut on the left of the stock. But, I cut both ways, depending on where the board is. I'm not going to spin a 16' board around just to use the laser. I bring the blade down before I turn it on and see where it hits the board.
It has an automatic brake on the motor, so when you turn it off, the blade comes to a stop quickly. Nice for keeping noise down.
I have a friend who borrows my "chop saw" and he thinks I spent $600 on it!
Good saw for the $$$ September 2, 2008
W. Stubblefield (KY)
2 out of 2 found this review helpful
So far we have used this saw for cutting window trim on one job and gutters on another job. The gutters were all mitered and it did a nice job. I had to remove and reinstall the blade guard because it would not work. It was installed wrong from the factory.
 Super November 10, 2008
Dennis W. Maloney
A great tool, as good as new, and it performed better than I hoped. I would highly recomend this saw.
|
